view boards/Ubiquiti/RSPRO/board.hints @ 218:66632fb813e3

Add new device Ubiquiti RSPRO Submited by: [email protected]
author ray@terran.dlink.ua
date Tue, 18 Oct 2011 21:08:21 +0300
parents
children ed80316b28e9
line wrap: on
line source

# ohci
hint.ohci.0.at="apb0"
hint.ohci.0.maddr=0x1c000000
hint.ohci.0.msize=0x01000000
hint.ohci.0.irq=6

# ehci
hint.ehci.0.at="nexus0"
hint.ehci.0.maddr=0x1b000000
hint.ehci.0.msize=0x01000000
hint.ehci.0.irq=1

# arge0
hint.arge.0.at="nexus0"
hint.arge.0.maddr=0x19000000
hint.arge.0.msize=0x1000
hint.arge.0.irq=2
# PHY4 = 1 << 4
hint.arge.0.phymask=0x10

# arge1
hint.arge.1.at="nexus0"
hint.arge.1.maddr=0x1a000000
hint.arge.1.msize=0x1000
hint.arge.1.irq=3
# PHY1, PHY2, PHY3 
hint.arge.1.phymask=0x0e
hint.arge.1.media=1000
hint.arge.1.fduplex=1
# RSPRO _really_ need the above two lines !

# RTC shares the same bus with mx25l. 
# CE low for flash, CE high for RTC
#hint.rtc.0.at="spibus0"
#hint.rtc.0.cs=0

# RF led - pin 2
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="rfled"
hint.gpioled.0.pins=0x0004