view contrib/dnsmasq/CHANGELOG.archive @ 415:c2163079c392

Allow to skip kernel toolchain build.
author Aleksandr Rybalko <ray@ddteam.net>
date Thu, 13 Sep 2012 23:29:54 +0300
parents ebaf543982cc
children
line wrap: on
line source
release 0.4 - initial public release

release 0.5 - added caching, removed compiler warning on linux PPC

release 0.6 - TCP handling: close socket and return to connect state if we 
              can't read the first byte. This corrects a problem seen very 
              occasionally where dnsmasq would loop using all available CPU.

	      Added a patch from Cris Bailiff <[email protected]>
	      to set SO_REUSEADDR on the tcp socket which stops problems when
              dnsmasq is restarted and old connections still exist.

	      Stopped claiming in doc.html that smail is the default Debian
	      mailer, since it isn't any longer. (Pointed out by
	      David Karlin <[email protected]>)

release 0.7   Create a pidfile at /var/run/dnsmasq.pid

	      Extensive armouring against "poison packets" courtesy of
              Thomas Moestl <[email protected]>

	      Set sockaddr.sa_family on outgoing address, patch from
	      David Symonds <[email protected]>

              Patch to clear cache on SIGHUP 
	      from Jason L. Wagner <[email protected]> 

	      Fix bad bug resulting from not initialising value-result	
	      address-length parameter to recvfrom() and accept() - it
	      worked by luck before!

release 0.95  Major rewrite: remove calls to gethostbyname() and talk
              directly to the upstream server(s) instead.
              This has many advantages.
              (1) Dnsmasq no longer blocks during long lookups.
              (2) All query types are handled now, (eg MX) not just internet
                  address queries. Addresses are cached, all other
                  queries are forwarded directly.
              (3) Time-to-live data from upstream server is read and
                  used by dnsmasq to purge entries from the cache.
              (4) /etc/hosts is still read and its contents served (unless 
	          the -h option is given).
              (5) Dnsmasq can get its upstream servers from
                  a file other than /etc/resolv.conf (-r option) this allows
                  dnsmasq to serve names to the machine it is running
                  on (put nameserver 127.0.0.1 in /etc/resolv.conf and
                  give dnsmasq the option -r /etc/resolv.dnsmasq)
              (6) Dnsmasq will re-read its servers if the
                  modification time of resolv.conf changes. Along with
                  4 above this allows nameservers to be set
		  automatically by ppp or dhcp.	 

              A really clever NAT-like technique allows the daemon to have lots
              of queries in progress, but still remain very lightweight.
	      Dnsmasq has a small footprint and normally doesn't allocate
              any more memory after start-up. The NAT-like forwarding was
              inspired by a suggestion from Eli Chen <[email protected]>

release 0.96  Fixed embarrasing thinko in cache linked-list code.
                             
release 0.98  Some enhancements and bug-fixes. 
              Thanks to "Denis Carre" <[email protected]> and Martin 
              Otte <[email protected]>	
              
	      (1) Dnsmasq now always sets the IP source address
                  of its replies correctly. Older versions would not always
                  do this on multi-homed and IP aliased hosts, which violates 
                  the RFC.
              (2) Dnsmasq no longer crashes if a server loop is created
	          (ie dnsmasq is told to use itself as an upstream server.)
                  Now it just logs the problem and doesn't use the bad 
                  server address.
              (3) Dnsmasq should now forward (but not cache) inverse queries 
                  and server status queries; this feature has not been tested.
              (4) Don't write the pid file when in non-daemon mode.
	      (5) Create the pid file mode 644, rather then 666 (!).
              (6) Generate queries to upstream nameservers with unpredictable
                  ids, to thwart DNS spoofers.
              (7) Dnsmasq no longer forwards queries when the 
	          "recursion desired" bit is not set in the header.
	      (8) Fixed getopt code to work on compliers with unsigned char.
              
release 0.991 Added -b flag: when set causes dnsmasq to always answer
	      reverse queries on the RFC 1918 private IP space itself and
              never forward them to an upstream server. If the name is not in
	      /etc/hosts, dnsmasq replies with the dotted-quad address.
              
              Fixed a bug which stopped dnsmasq working on a box with
              two or more interfaces with the same IP address. 

              Fixed cacheing of CNAMEs. Previously, a CNAME which pointed
              to  a name with many A records would not have all the addresses
              returned when being answered from the cache.

	      Thanks to "Steve Hardy" <[email protected]> for his input 
              on these fixes.

              Fixed race which could cause dnsmasq to miss the second of
              two closely-spaced updates of resolv.conf (Thanks to Eli Chen
              for pointing this out.)

	      Fixed a bug which could cause dnsmasq to fail to cache some
              dns names.

release 0.992 Small change to memory allocation so that names in /etc/hosts
              don't use cache slots. Also make "-c 0" flag meaningfully 
              disable caching completely.                            

release 0.993 Return only the first (canonical) name from an entry in
	      /etc/hosts as reply to reverse query.
              
              Handle wildcard queries for names/addresses in /etc/hosts
	      this is mainly to allow reverse lookups by dig to succeed.
	      (Bug reported by Simon J. Rowe" <[email protected]>)  
              
              Subtle change to the logic which selects which of multiple
	      upstream servers we send queries to. This fixes a problem 
              where dnsmasq continuously sends queries to a server which
	      is returning error codes and ignores one which is working.
              
release 0.994 Fixed bug which broke lookup of names in /etc/hosts
              which have upper-case letters in them. Thanks for Joao Clemente
              for spotting that one. 

	      Output cache statistics on receipt of SIGUSR1. These go
              to syslog except in debug (-d) mode, when a complete cache
	      dump goes to stdout. Suggestion from Joao Clemente, code
              based in John Volpe's.
              
	      Accept GNU long options on the command line. Code from 
	      John Volpe for this. 

              Split source code into multiple files and produced 
	      a proper makefile. 
              
              Included code from John Volpe to parse dhcp.leases file
              written by ISC dhcpd. The hostnames in the leases file are
              added to the cache and updated as dhcpd updates the 
              leases file. The code has been heavily re-worked by me,
              so any bugs are probably mine.

release 0.995 Small tidy-ups to signal handling and cache code.

release 0.996 Added negative caching: If dnsmasq gets a "no such domain" reply
              from an upstream nameserver, it will cache that information
              for a time specified by the SOA RR in the reply. See RFC 2308
              for details. This is useful with  resolver libraries
              which append assorted suffices to non-FQDN in an attempt to 
              resolve them, causing useless cache misses.

              Added -i flag, which restricts dnsmasq to offering name service
              only on specified interfaces.

release 0.997 Deleted INSTALL script and added "install" target to makefile.

              Stopped distributing binaries in the tarball to avoid 
              libc version clashes.

              Fixed  interface detection code to
              remove spurious startup errors in rare circumstances.

              Dnsmasq now changes its uid, irrevocably, to nobody after
              startup for security reasons. Thanks to Peter Bailey for
              this patch.

	      Cope with infinite DHCP leases. Patch thanks to 
	      Yaacov Akiba Slama.

	      Added rpm control files to .tar.gz distribution. Thanks to
              Peter Baldwin at ClarkConnect for those.

              Improved startup script for rpms. Thanks to Yaacov Akiba Slama.

release 1.0   Stable release: dnsmasq is now considered feature-complete
              and stable.
              
release 1.1   Added --user argument to allow user to change to
              a different userid.

              Added --mx-target argument to allow mail to be delivered
              away from the gateway machine running dnsmasq.

              Fixed highly  obscure bug with wildcard queries for
              DHCP lease derived names.

              Moved manpage from section 1 to section 8.

              Added --no-poll option.
              Added Suse-rpm support.
              Thanks to Joerg Mayer for the last two.

release 1.2   Added IPv6 DNS record support. AAAA records are cached
              and read from /etc/hosts. Reverse-lookups in the
	      ip6.int and ip6.arpa domains are suppored. Dnsmasq can
              talk to upstream servers via IPv6 if it finds IP6 addresses
              in /etc/resolv.conf and it offers DNS service automatically
              if IPv6 support is present in the kernel.

              Extended negative caching to NODATA replies.

              Re-vamped CNAME processing to cope with RFC 2317's use of
              CNAMES to PTR RRs in CIDR.

              Added config.h and a couple of symbols to aid
              compilation on non-linux systems.

release 1.3   Some versions of the Linux kernel return EINVAL rather
              then ENPROTONOSUPPORT when IPv6 is not available, 
              causing dnsmasq to bomb out. This release fixes that.
              Thanks to Steve Davis for pointing this one out.

              Trivial change to startup logic so that dnsmasq logs
              its stuff and reads config files straight away on
              starting, rather than after the first query - principle 
              of least surprise applies here.     

release 1.4   Fix a bug with DHPC lease parsing which broke in
              non-UTC timezones. Thanks to Mark Wormgoor for
              spotting and diagnosing this. Fixed versions in
              the .spec files this time. Fixed bug in Suse startup
              script. Thanks to Didi Niklaus for pointing this out.

release 1.5   Added --filterwin2k option which stops dnsmasq from forwarding
	      "spam" queries from win2k boxes. This is useful to stop spurious
              connections over dial-on-demand links. Thanks to Steve Hardy 
              for this code.

              Clear "truncated" bit in replies we return from upstream. This
              stops resolvers from switching to TCP, which is pointless since
              dnsmasq doesn't support TCP. This should solve problems
              in resolving hotmail.com domains.

              Don't include getopt.h when Gnu-long-options are disabled -
              hopefully this will allow compilation on FreeBSD.

	      Added the --listen-address and --pid-file flags.

              Fixed a bug which caused old entries in the DHCP leases file
              to be used in preference to current ones under certain
              circumstances.

release 1.6   If a machine gets named via DHCP and the DHCP name doesn't have
              a domain part and domain suffix is set using the -s flag, then
              that machine has two names with the same address, with and 
              without the domain suffix. When doing a _reverse_ lookup to
              get the name, the "without suffix" name used to be returned,
              now the "with suffix" one gets returned instead. This change
	      suggested by Arnold Schulz.

              Fixed assorted typos in the documentation. Thanks 
              to David Kimdon.

              Subtle rearrangement to the downloadable tarball, and stopped
              distributing .debs, since dnsmasq is now an official Debian
              package.

release 1.7   Fix a problem with cache not clearing properly
              on receipt of SIGHUP. Bug spotted by Sat Deshpande.

              In group-id changing code:
	      1) Drop supplimentary groups.
              2) Change gid before dropping root (patch from Soewono Effendi.)
              3) Change group to "dip" if it exists, to allow access
                 to /etc/ppp/resolv.conf (suggestion from Jorg Sommer.)
              Update docs to reflect above changes.

              Other documentation changes from David Miller.
              Added suggested script fragment for dhcpcd.exe.

release 1.8   Fix unsafe use of tolower() macro - allows linking against 
              ulibc. (Patches from Soewono Effendi and Bjorn Andersson.)

              Fix typo in usage string.

	      Added advice about RedHat PPP configuration to
              documentation. (Thanks to C. Lee Taylor.)

	      Patches to fix problems on BSD systems from Marc Huber
              and Can Erkin Acar. These add the options
              HAVE_ARC4RANDOM and HAVE_SOCKADDR_SA_LEN to config.h.
	      Elaborated config.h - should really use autoconf.

	      Fix time-to-live calculation when chasing CNAMEs.

	      Fix use-after-free and missing initialisation bugs in
              the cache code. (Thanks to Marc Huber.)

              Builds on Solaris 9. (Thanks to Marc Huber.)           

release 1.9   Fixes to rpm .spec files.

              Don't put expired DHCP entries into the cache only to 
	      throw them away again.

              Put dnsmasq on a severe memory diet: this reduces both
              the amount of heap space used and the stack size
              required. The difference is not really visible with
              bloated libcs like glibc, but should dramatically reduce
              memory requirements when linked against ulibc for use on
              embeded routers, and that's the point really. Thanks to
              Matthew Natalier for prompting this.   

	      Changed debug mode (-d) so that all logging appears on
              stderr as well as going to syslogd. 

	      Added HAVE_IPV6 config symbol to allow compilation
              against a libc which doesn't have IPv6 support.

	      Added a facility to log all queries, enabled with -q flag.

	      Fixed packet size checking bug in address extraction code.

	      Halved default cache size - 300 was way OTT in typical use.

	      Added self-MX function, enabled by -e flag. Thanks to
              Lyonel Vincent for the patch.

	      Added HAVE_FORK config symbol and stuff to support
              uClinux. Thanks to Matthew Natalier for uClinux stuff. 

release 1.10  Log warnings if resolv.conf or dhcp.leases are not
              accessable for any reason, as suggested by Hinrich Eilts.

	      Fixed wrong address printing in error message about
	      no interface with address.

	      Updated docs and split installation instuctions into setup.html.

	      Fix bug in CNAME chasing code: One CNAME pointing
	      to many A records would lose A records after the 
	      first. This bug was introduced in version 1.9.

	      Log startup failures at level Critical as well as 
	      printing them to standard error.
	      Exit with return code 1 when given bad options.

	      Cleaned up code for no-cache operation.

              Added -o option which forces dnsmasq to use to
              upstream servers in the order they appear in /etc/resolv.conf.

              Added upstream server use logging.

              Log full cache dump on receipt of SIGUSR1 when query 
              logging is enabled (-q switch).

	      Added -S option to directly specify upstream servers and
              added ability to direct queries for specific domains to
              specfic servers. Suggested by Jens Vonderheide.

	      Upgraded random ID generation - patch from Rob Funk.	      

	      Fixed reading of domains in arguments with capital
              letters or trailing periods.

	      Fixed potential SEGV when given bad options.

	      Read options from /etc/dnsmasq.conf if it exists.
              Do sensible things with missing parameters, eg 
              "--resolv-file=" turns off reading /etc/resolv.conf.

release 1.11  Actually implement the -R flag promised in the 1.10 man page.

              Improve and rationalise the return codes in answers to
              queries. In the case that there are no available
              upstream servers to forward a query to, return REFUSED.
              This makes sendmail work better on modem connected
              systems when the modem link is down (Thanks to Roger Plant).
	      Cache and return the NXDOMAIN status of failed queries:
              this makes the `host` command work when traversing search
              paths (Thanks to Peter Bailey). Set the "authoritative"
              bit in replies containing names from /etc/hosts or DHCP.

              Tolerate MS-DOS style line ending codes in /etc/hosts
	      and /etc/resolv.conf, for people who copy from winsock
              installations.

	      Allow specification of more than one resolv.conf file. This is 
              intended for laptops which connect via DHCP or
              PPP. Whichever resolv.conf was updated last is used.

              Allow -S flags which specify a domain but no server
              address. This gives local domains which are never forwarded.

	      Add -E flag to automatically add the domain suffix to
              names in /etc/hosts -suggestion from Phil Harman.

	      Always return a zero time-to-live for names derived from 
	      DHCP which stops anthing else caching these
              names. Previously the TTL was derived from the lease
              time but that is incorrect since a lease can be given
              up early: dnsmasq would know this but anything with the
              name cached with long TTL would not be updated.

	      Extended HAVE_IPV6 config flag to allow compliation on
	      old systems which don't have modern library routines
	      like inet_ntop(). Thanks to Phil Harman for the patch.

release 1.12  Allow more than one domain in server config lines and
	      make "local" a synonym for "server". This makes things
	      like "local=/localnet/thekelleys.org.uk/" legal. Allow
              port to specified as part of server address.

	      Allow whole domains to have an IP address specified
              in /etc/dnsmasq.conf. (/etc/hosts doesn't work domains).
              address=/doubleclick.net/127.0.0.1 should catch all
              those nasty banner ads. Inspired by a patch 
	      from Daniel Gryniewicz

	      Log the source of each query when logging switched on. 

	      Fix bug in script fragment for dhcpcd - thanks to Barry Stewart.
	      
	      Fix bug which meant that strict-order and self-mx were
	      always enabled.

	      Builds with Linux libc5 now - for the Freesco project.

	      Fixed Makefile installation script (patch from Silvan
	      Minghetti) and added CC and CFLAGS variables.

	      Improve resource allocation to reduce vulnerability to
	      DOS attacks - the old version could have all queries
	      blocked by a continuous high-speed stream of
	      queries. Now some queries will succeed, and the excess
	      will be rejected with a server fail error. This change also
	      protects against server-loops; setting up a resolving
              loop between two instances of dnsmasq is no longer
	      catastrophic. The servers will continue to run, looped
	      queries fail and a warning is logged. Thanks to C. Lee
	      Taylor for help with this.
	      
release 1.13  Added support for building rpms suitable for modern Suse 
	      systems. (patch from Andi <[email protected]>)
	      
	      Added options --group, --localmx, --local-ttl,
	      --no-negcache, --addn-host.
	      
	      Moved all the various rpm-building bits into /rpm.
	      
	      Fix builds with glibc 2.1 (thanks to Cristian
	      Ionescu-Idbohrn)
	      
	      Preserve case in domain names, as per RFC1035.
	      
	      Fixed ANY queries to domains with --address specification.
	      
	      Fixed FreeBSD build. (thanks to Steven Honson)
	      
	      Added -Q option which allows a specified port to be used
	      to talk to upstream servers. Useful for people who want
	      very paranoid firewalls which open individual UDP port.
	      (thanks to David Coe for the patch)
	      	      
release 1.14  Fixed man page description of -b option which confused 
	      /etc/hosts with /etc/resolv.conf. (thanks to Christopher
	      Weimann)
	      
	      Fixed config.h to allow building under MACOS X and glibc
	      2.0.x. (thanks to Matthew Gregan and Serge Caron)
	      
	      Added --except-interface option. (Suggested by Serge Caron)

	      Added SIGUSR2 facility to re-scan for new
	      interfaces. (Suggested by Serge Caron)

	      Fixed SEGV in option-reading code for invalid options.
	      (Thanks to Klaas Teschauer)

              Fixed man page to clarify effect of SIGUSR1 on
	      /etc/resolv.conf.
	      (Thanks to Klaas Teschauer)
	      
	      Check that recieved queries have only rfc1035-legal characters
	      in them. This check is mainly to avoid bad strings being
	      sent to syslog.

	      Fixed &&/& confusion in option.c and added DESTDIR
	      variable for "make install" (Thanks to Osvaldo 
              Marques for the patch.)

	      Fixed /etc/hosts parsing code to cope with MS-DOS
	      line-ends in the file. This was supposed to be done in
	      version 1.11, but something got missed. (Thanks to Doug
	      Copestake for helping to find this.)

	      Squash repeated name/address pairs read from hosts
	      files.

	      Tidied up resource handling in util.c (Thanks to
	      Cristian Ionescu-Idbohrn).

	      Added hashed searching of domain names. People are starting
	      to use dnsmasq with larger loads now, and bigger caches,
	      and large lists of ad-block addresses. This means doing
	      linear searches can start to use lots of CPU so I added hashed
	      searching and seriously optimised the cache code for 
	      algorithmic efficiency. Also upped the limit on cache 
	      size to 10000.

	      Fixed logging of the source of names from the additional
	      hosts file and from the "bogus private address" option.

	      Fixed spurious re-reading of empty lease files. (Thanks
	      to Lewis Baughman for spotting this.)

	      Fixed building under uclibc (patch from Cristian Ionescu-Idbohrn)
	      
	      Do some socket tweaking to allow dnsmasq to co-exist
	      with BIND. Thanks to Stefan 'Sec' Zehl for the patch.

release 1.15  Added --bogus-nxdomain option.

              Restrict checking of resolv.conf and DHCP leases files
              to once per second. This is intended to improve
              performance under heavy loads. Also make a system call
	      to get the current time once per query, rather than four
              times.

	      Increased number of outstanding queries to 150 in
	      config.h

release 1.16  Allow "/" characters in domain names - this fixes
              caching of RFC 2317 CNAME-PTR records.

	      Fixed brain-fart in -B option when GETOPT_LONG not
	      enabled - thanks to Steven Young and Jason Miller 
	      for pointing this out.

	      Generalised bogus-nxdomain code: allow more than one
	      address to check, and deal with replies with multiple
	      answer records. (Based on contribution from Humberto
	      Massa.)

	      Updated the documentation to include information about
	      bogus-nxdomain and the Verisign tragedy.

	      Added libraries needed on Solaris to Makefile.

	      Added facility to set source address in queries to
	      upstream nameservers. This is useful with multihomed
	      hosts, especially when using VPNs. Thanks to Tom Fanning
	      for suggesting this feature.

	      Tweaked logging: log to facility LOCAL0 when in
	      debug/no-daemon mode and changed level of query logging
	      from INFO to DEBUG. Make log options controllable in
	      config.h

release 1.17  Fixed crash with DHCP hostnames > 40 characters.

              Fixed name-comparision routines to not depend on Locale,
              in theory this versions since 1.15 could lock up or give
              wrong results when run with locale != 'C'.

	      Fix potential lockup in cache code. (thanks to Henning
	      Glawe for help chasing this down.)

	      Made lease-file reader bullet-proof.

	      Added -D option, suggested by Peter Fichtner.

release 1.18  Added round-robin DNS for names which have more than one
              address. In this case all the addresses will be
              returned, as before, but the order will change on each
              query.

	      Remove stray tolower() and isalnum() calls missed in 
	      last release to complete LOCALE independence.

	      Allow port numbers in source-address specifications.

	      For hostnames without a domain part which don't get
	      forwarded because -D is in effect, return NXDOMAIN not
	      an empty reply.

	      Add code to return the software version in repsonse to the
	      correct magic query in the same way as BIND. Use  
	      "dig version.bind chaos txt" to make the query.

	      Added negative caching for PTR (address to name) records.

	       Ensure that names of the form typically used in PTR queries
              (ie w.x.yz.in-addr.arpa and IPv6 equivalents) get
              correct answers when queried as other types. It's
              unlikely that anyone would do this, but the change makes
              things pedantically correct.

	      Taught dnsmasq to understand "bitstring" names, as these
	      are used for PTR lookups of IPv6 addresses by some 
	      resolvers and lookup tools. Dnsmasq now understands both
	      the ip6.int domain and the ip6.arpa domain and both
	      nibble and bitstring formats so it should work with any
	      client code. Standards for this stuff have flip-flopped
	      over the last few years, leaving many different clients
	      in their wake. See RFC2673 for details of bitstrings.
	      
	      Allow '_' characters in domain names: Legal characters
	      are now [a-z][A-Z].-_ Check names read from hosts files
	      and leases files and reject illegal ones with a message
	      in syslog. 

	      Make empty domain names in server and address options 
	      have the special meaning "unqualified
	      names". (unqualified names are names without any dots in
	      them). It's now possible to do server=//1.2.3.4 and have 
	      unqualified names sent to a special nameserver.

release 2.0rc1  
              Moved source code into src/ directory.

	      Fixes to cure compilation breakage when HAVE_IPV6 not
	      set, thanks to Claas Hilbrecht.

	      BIG CHANGE: added an integrated DHCP server and removed
	      the code to read ISC dhcp.leases. This wins in terms 
	      of ease of setup and configuration flexibility and 
	      total machine resources consumed. 

	      Re-jiged the signal handling code to remove a race
	      condition and to be more portable.

release 2.0
	     Thanks to David Ashworth for feedback which informed many 
	     of the fixes below.

             Allow hosts to be specified by client ID in dhcp-hosts
             options. These are now one of 
             dhcp-host=<hardware addr>,.... 
             dhcp-host=id:<hex client id>,..... 
             dhcp-host=id:<ascii client id>,.....
	     
	     Allow dhcp-host options to specify any IP address on the
             DHCP-served network, not just the range available for
             dynamic allocation.

	     Allow dhcp-host options for the same host with different
	     IP adresses where the correct one will be selected for
	     the network the host appears on.

	     Fix parsing of --dhcp-option to allow more than one
	     IP address and to allow text-type options.	     

	     Inhibit use of --dhcp-option to send hostname DHCP options.
	     
	     Update the DNS with DHCP information after re-reading
	     /etc/hosts so that any DHCP derived names which have been
	     shadowed by now-deleted hosts entries become visible.

	     Fix typos in dnsmasq.conf.example

	     Fixes to Makefile(s) to help pkgsrc packaging - patch 
	     from "pancake".

	     Add dhcp-boot option to support network boot.

	     Check for duplicate IP addresses in dhcp-hosts lines
	     and refuse to run if found. If allowed to remain these 
	     can provoke an infinite loop in the DHCP protocol.

	     Attempted to rationalise the .spec files for rpm
	     building. There are now files for Redhat, Suse and
	     Mandrake. I hope they work OK.

	     Fixed hard-to-reproduce crash involving use of local
	     domains and IPv6 queries. Thanks to Roy Marples for
	     helping to track that one down.

release 2.1  
             Thanks to Matt Swift and Dag Wieers for many suggestions 
	     which went into this release.
	    
	     Tweak include files to allow compilation on FreeBSD 5
             
             Fix unaligned access warnings on BSD/Alpha.

	     Allow empty DHCP options, like so: dhpc-option=44
 
             Allow single-byte DHCP options like so: dhcp-option=20,1

	     Allow comments on the same line as options in
	     /etc/dnsmasq.conf

	     Don't complain when the same name and address is
	     allocated to a host using DHCP and /etc/hosts.
	     
	     Added to the example configuration the dnsmasq equivalent
	     of the ISC dhcpd settings given in 
             http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt

	     Fixed long-existing strangeness in Linux IPv6 interface
	     discovery code. The flags field in /proc/net/if_inet6 is
	     _not_ the interface flags. 

	     Fail gracefully when getting an ENODEV error when trying
	     to bind an IPv6 socket, rather than bailing out. Thanks
	     to Jan Ischebeck for feedback on that.

	     Allow the name->address mapping for static DHCP leases to
	     be set by /etc/hosts. It's now possible to have
     	        dhcp-host=<mac addr>,wibble
	     or even
                dhcp-host=wibble
	     and in /etc/hosts have
	        wibble 1.2.3.4
	     and for the correct thing to happen. Note that some sort
	     of dhcp-host line is still needed, it's not possible for
	     random host to claim an address in /etc/hosts without
	     some explicit configuration.

	     Make 0.0.0.0 in a dhcp-option to mean "the machine
	     running dnsmasq".
    		    
             Fix lease time spec when specified in dhcp-range and not
	     in dhcp-host, previously this was always one hour.

             Fix problem with setting domains as "local only". -
             thanks to Chris Schank.

	     Added support for max message size DHCP option.

release 2.2
             Fix total lack for DHCP functionality on
	     Linux systems with IPv6 enabled. - thanks to
	     Jonathon Hudson for spotting that.

	     Move default config file under FreeBSD - patch from
	     Steven Honson 

release 2.3
             Fix "install" makefile target. (reported by Rob Stevens)

	     Ensure that "local=/domain/" flag is obeyed for all
	     queries on a domain, not just A and AAAA. (Reported by
	     Peter Fichtner.)

	     Handle DHCPDECLINE messages and provide an error message
	     in DHCPNAK messages.
	     
	     Add "domain" setting example to
	     dnsmasq.conf.example. Thanks to K P Kirchdorfer for
	     spotting that it was missing.

	     Subtle change to the DHCPREQUEST handling code to work
	     around a bug in the DHCP client in HP Jetdirect printers.
	     Thanks to Marko Stolle for finding this problem.

	     Return DHCP T1 and T2 times, with "fuzz" to desychronise lease
	     renewals, as specified in the RFC.
	     
	     Ensure that the END option is always present in DHCP
	     packets , even if the packet is too small to fit all 
	     the requested options.

	     Handle larger-than-default DHCP packets if required, up
	     to the ethernet MTU.

	     Fix a couple of places where the return code from
	     malloc() was not checked.

	     Cope with a machine taking a DHCP lease and then moving
	     network so that the lease address is no longer valid.

	     The DHCP server will now work via a BOOTP relay - remote
	     networks are configured with the dhcp-range option the
	     same as directly connected ones, but they need an
	     additional netmask parameter. Eg
	     --dhcp-range=192.168.4.10,192.168.4.50,255.255,255.0
             will enable DHCP service via a BOOTP relay on the
	     192.168.4.0 network. 

	     Add a limit on the number of available DHCP leases,
	     otherwise the daemon could be DOSed by a malicious
	     host. The default is 150, but it can be changed by the 
	     dhcp-lease-max option.

	     Fixed compilation on OpenBSD (thanks to Frederic Brodbeck
	     for help with that.)
	     
	     Reworked the DHCP network handling code for two good
	     effects: (1) The limit of one network only for DHCP on
	     FreeBSD is now gone, (2) The DHCP server copes with
	     dynamically created interfaces. The one-interface
	     limitation remains for OpenBSD, which is missing
	     extensions to the socket API which have been in Linux
	     since version 2.2 and FreeBSD since version 4.8.

	     Reworked the DNS network code to also cope with
	     dynamically created interfaces. dnsmasq will now listen
	     to the wildcard address and port 53 by default, so if no
	     --interface or --address options are given it will handle
	     dynamically created interfaces. The old behaviour can be
	     restored with --bind-interfaces for people running BIND
	     on one interface and dnsmasq on another. Note that
	     --interface and --address options still work, but the
	     filtering is done by dnsmasq, rather then the kernel.
	     This works on Linux, and FreeBSD>=5.0. On systems which
	     don't support the required API extensions, the old 
	     behaviour is used, just as if --bind-interfaces had been set.

	     Allow IPv6 support to be disabled at compile time. To do
	     that, add -DNO_IPV6 to the CFLAGS. Thanks to Oleg
	     I. Vdovikin for the suggestion to do that.

	     Add ability to set DHCP options per network. This is done
	     by giving a network an identifier like this:
	     dhcp-range=red-net,192.168.0.10,192.168.0.50
	     and then labeling options intended for that network only
	     like this:
	     dhcp-option=red-net,6,1.1.1.1
	     Thanks to Oleg Vdovikin for arguing that one through.

	     Made errors in the configuration file non-fatal: dnsmasq
	     will now complain bitterly, but continue.

	     Added --read-ethers option, to allow dnsmasq to pull
	     static DHCP information from that file. 
	     Thanks to Andi Cambeis for that suggestion.

	     Added HAVE_BROKEN_RTC compilation option to support
	     embedded systems without a stable RTC. Oleg Vdovikin
	     helped work out how to make that work.

release 2.4
	     Fixed inability to start when the lease file doesn't
	     already exist. Thanks to Dag Wieers for reporting that.

	     Fixed problem were dhcp-host configuration options did
	     not play well with entries in /etc/ethers for the same
	     host. Thanks again to Dag Wieers.

	     Tweaked DHCP code to favour moving to a newly-configured
	     static IP address rather than an old lease when doing
	     DHCP allocation.

	     Added --alias configuration option. This provides IPv4
	     rewrite facilities like Cisco "DNS doctoring". Suggested
	     by Chad Skeeters.

	     Fixed bug in /etc/ethers parsing code triggered by tab
	     characters. Qudos to Dag Wieers for hepling to nail that
	     one.
 	     
	     Added "bind-interfaces" option correctly.	     

release 2.5
	     Made "where are we allocating addresses?" code in DHCP
	     server cope with requests via a relay which is on a
	     directly connected network for which there is not a
	     configured netmask. This strange state of affairs occurs
	     with win4lin. Thanks to Alex Melt and Jim Horner for bug
	     reports and testing with this. 

	     Fixed trivial-but-irritating missing #include which broke
	     compilation on *BSD.

	     Force --bind-interfaces if IP-aliased interface
	     specifications are used, since the sockets API provides
	     no other sane way to determine which alias of an
	     interface a packet was sent to. Thanks to Javier Kohen
	     for the bug report.

release 2.6 
	     Support Token Ring DHCP. Thanks to Dag Wieers for help
	     testing. Note that Token ring support only works on Linux 
	     currently.

	     Fix compilation on MacOS X. Thanks to Bernhard Ehlers for
	     the patch.

	     Added new "ignore" keyword for
	     dhcp-host. "dhcp-host=11:22:33:44:55:66,ignore" will
	     cause the DHCP server to ignore any host with the given
	     MAC address, leaving it to other servers on the
	     network. This also works with client-id and hostnames.
	     Suggestion by Alex Melt.

	     Fixed parsing of hex client IDs. Problem spotted by Peter
	     Fichtner.

	     Allow conf-file options in configuration file, to
	     provide an include function.
	     
	     Re-read /etc/ethers on receipt of SIGHUP.

	     Added back the ability to read ISC dhcpd lease files, by
	     popular demand. Note that this is deprecated and for
	     backwards compatibility only. You can get back the 4K of
	     memory that the code occupies by undefining
	     "HAVE_ISC_READER" in src/config.h

	     Added ability to disable "pool" DHCP address allocation
	     whilst leaving static leases working. The syntax is
	     "dhcp-range=192.168.0.0,static"
	     Thanks to Grzegorz Nosek for the suggestion.

	     Generalized dnsmasq-rh.spec file to work on Mandrake too,
	     and removed dnsmasq-mdk.spec. Thanks to Doug Keller.

	     Allow DHCP options which are tied to specific static
	     leases in the same way as to specific networks.

	     Generalised the dhcp-option parser a bit to allow hex
	     strings as parameters. This is now legal:
	     dhcp-option=128,e4:45:74:68:00:00
	     Inspired by a patch from Joel Nordell.

	     Changed the semantics of argument-less dhcp-options for
	     the default-setting ones, ie 1, 3, 6 and 28. Now, doing
	     eg, dhcp-option=3 stops dnsmasq from sending a default
	     router option at all. Thanks to Scott Emmons for pointing
	     out that this is useful.

	     Fixed dnsmasq.conf parsing bug which interpreted port
	     numbers in server= lines as a comment. To start a
	     comment, a '#' character must now be a the start of a
	     line or preceded by whitespace. Thanks to Christian
	     Haggstrom for the bug report.

release 2.7  
             Allow the dhcp-host specification of id:* which makes 
	     dnsmasq ignore any client-id. This is useful to ensure 
	     that a dual-boot machine sees the same lease when one OS 
	     gives a client-id and the other doesn't. It's also useful
	     when PXE boot DHCP does not use client IDs but the OS it boots 
             does. Thanks to Grzegorz Nosek for suggesting this enhancement.

	     No longer assume that ciaddr is zero in received DHCPDISCOVER 
	     messages, just for security against broken clients.

	     Set default of siaddr field to the address of the machine running 
             dnsmasq when not explicitly set using dhcp-boot
             option. This is the ISC dhcpd behaviour.  

             Send T1 and T2 options in DHCPOFFER packets. This is required
	     by the DHCP client in some JetDirect printers. Thanks 
             to Paul Mattal for work on this.

	     Fixed bug with DHCP on OpenBSD reported by Dominique Jacquel.
	     The code which added loopback interfaces to the list
	     was confusing the DHCP code, which expected one interface only.
	     Solved by adding loopback interfaces to address list instead.

	     Add dhcp-vendorclass option to allow options to be sent only
	     to certain classes of clients.

	     Tweaked option search code so that if a netid-qualified
	     option is used, any unqualified option is ignored.
	     
	     Changed the method of picking new dynamic IP
	     addresses. This used to use the next consecutive
	     address as long it was free, now it uses a hash
	     from the client hardware address. This reduces the amount
	     of address movement for clients which let their lease
	     expire and allows consecutive DHCPOFFERS to the same host
	     to (almost always) be for the same address, without
	     storing state before a lease is granted.
 
	     Tweaked option handling code to return all possible
	     options rather than none when DHCP "requested options"
	     field is missing. This fixes interoperability with
	     ancient IBM LANMAN DHCP clients. Thanks to Jim Louvau for
	     help with this.

release 2.8
	     Pad DHCP packets to a minimum size of 300 bytes. This
	     fixes interoperability problems with the Linux in-kernel
	     DHCP/BOOTP client. Thanks to Richard Musil for
	     diagnosing this and supplying a patch.

	     Fixed option-parsing bug and potential memory leak. Patch
	     from Richard Musil.

	     Improved vendor class configuration and added user class
	     configuration. Specifically: (1) options are matched on
	     the netids from dhcp-range, dhcp-host, vendor class and
	     user class(es). Multiple net-ids are allowed and options
	     are searched on them all. (2) matches agains vendor class
	     and user class are now on a substring, if the given
	     string is a substring of the vendor/user class, then a
	     match occurs. Thanks again to Richard Musil for prompting
	     this.

	     Make "#" match any domain on --address and --server
	     flags. --address=/#/1.2.3.4 will return 1.2.3.4 for _any_
	     domain not otherwise matched. Of course
	     --server=/#/1.2.3.4 is exactly equivalent to
	     --server=1.2.3.4. Special request from Josh Howlett.
	
	     Fixed a nasty bug which would cause dnsmasq to lose track
	     of leases for hosts which had a --dhcp-host flag without
	     a name specification. The mechanism for this was that
	     the hostname could get erroneously set as a zero-length
	     string and then written to the leases file as a
	     mal-formed line. Restarting dnsmasq would then lose the lease.
	     Alex Hermann's work helped chase down this problem.

	     Add checks against DHCP clients which return zero-length
	     hostnames. This avoids the potential lease-loss problems
	     reffered to above. Also, if a client sends a hostname when
	     it creates a lease but subsequently sends no or a
	     zero-length hostname whilst renewing, continue to use the
	     existing hostname, don't wipe it out. 
	     
	     Tweaked option parsing to flag some parameter errors.

release 2.9
	     Fixed interface filter code for two effects: 1) Fixed bug
	     where queries sent via loopback interface
	     but to the address of another interface were ignored
	     unless the loopback interface was explicitly configured.
	     2) on OpenBSD failure to configure one interface now
	     causes a fatal error on startup rather than an huge
	     stream of log messages. Thanks to Erik Jan Tromp for 
	     finding that bug.

	     Changed server selection strategy to improve performance
	     when there are many available servers and some are
	     broken. The new algorithm is to pick as before for the
	     first try, but if a query is retried, to send to all
	     available servers in parallel. The first one to reply
	     then becomes prefered for the next query. This should 
	     improve reliability without generating significant extra
	     upstream load.

	     Fixed breakage of special servers/addresses for
	     unqualified domains introduced in version 2.8 
	      
	     Allow fallback to "bind-interfaces" at runtime: Some
	     verions of *BSD seem to have enough stuff in the header
	     files to build but no kernel support. Also now log if
	     "bind-interfaces" is forced on.

	     Log replies from upstream servers which refuse to do
	     recursion - dnsmasq is not a recursive nameserver and
	     relies on upstream servers to do the recursion, this
	     flags a configuration error.

	     Disable client-id matching for hosts whose MAC address is
	     read from /etc/ethers. Patch from Oleg I. Vdovikin.

	     Extended --mx-host flag to allow arbitrary targets for MX
	     records, suggested by Moritz Bunkus.

	     Fixed build under NetBSD 2.0 - thanks to Felix Deichmann
	     for the patch.
	     
	     Deal correctly with repeated addresses in /etc/hosts. The
	     first name found is now returned for reverse lookups,
	     rather than all of them.

	     Add back fatal errors when nonexistant 
	     interfaces or interface addresses are given but only in
	     "bind-interfaces" mode. Principle of least surprise applies.
	     
	     Allow # as the argument to --domain, meaning "read the
	     domain from the first search directive in
	     /etc.resolv.conf". Feature suggested by Evan Jones.

release 2.10
	    Allow --query-port to be set to a low port by creating and
	    binding the socket before dropping root. (Suggestion from
	    Jamie Lokier) 

	    Support TCP queries. It turned out to be possible to do
	    this with a couple of hundred lines of code, once I knew
	    how. The executable size went up by a few K on i386.
	    There are a few limitations: data obtained via TCP is not
	    cached, and dynamically-created interfaces may break under
	    certain circumstances. Source-address or query-port
	    specifications are ignored for TCP.

	    NAK attempts to renew a DHCP lease where the DHCP range
	    has changed and the lease is no longer in the allowed
	    range. Jamie Lokier pointed out this bug.

	    NAK attempts to renew a pool DHCP lease when a statically
	    allocated address has become available, forcing a host to
	    move to its allocated address. Lots of people have
	    suggested this change and been rebuffed (they know who
	    they are) the straws that broke the camel's back were Tim
	    Cutts and Jamie Lokier.

	    Remove any nameserver records from answers which are
	    modified by --alias flags. If the answer is modified, it
	    cannot any longer be authoritative.

	    Change behaviour of "bogus-priv" option to return NXDOMAIN
	    rather than a PTR record with the dotted-quad address as
	    name. The new behaviour doesn't provoke tcpwrappers like
	    the old behavior did.

	    Added a patch for the Suse rpm. That changes the default
	    group to one suitable for Suse and disables inclusion of
	    the ISC lease-file reader code. Thanks to Andy Cambeis for
	    his ongoing work on Suse packaging.

	    Support forwarding of EDNS.0 The maximum UDP packet size 
	    defaults to 1280, but may be changed with the
	    --edns-packet-max option. Detect queries with the do bit
	    set and always forward them, since DNSSEC records are 
	    not cached. This behaviour is required to make
	    DNSSECbis work properly though dnsmasq. Thanks to Simon
	    Josefsson for help with this.

	    Move default config file location under OpenBSD from
	    /usr/local/etc/dnsmasq.conf to /etc/dnsmasq.conf. Bug
	    report from Jonathan Weiss.

	    Use a lease with matching MAC address for a host which
	    doesn't present a client-id, even if there was a client ID 
	    at some point in the past. This reduces surprises when
	    changing DHCP clients, adding id:* to a host, and from the
	    semantics change of /etc/ethers in 2.9. Thanks to Bernard
	    Sammer for finding that.

	    Added a "contrib" directory and in it the dnslist utility,
	    from Thomas Tuttle.

	    Fixed "fail to start up" problems under Linux with IPv6
	    enabled. It's not clear that these were an issue in
	    released versions, but they manifested themselves when TCP
	    support was added. Thanks to Michael Hamilton for
	    assistance with this.

version 2.11
	    Fixed DHCP problem which could result in two leases in the
            database with the same address. This looked much more
            alarming then it was, since it could only happen when a
            machine changes MAC address but kept the same name. The
            old lease would persist until it timed out but things
            would still work OK. 

	    Check that IP addresses in all dhcp-host directives are
	    unique and die horribly if they are not, since otherwise
	    endless protocol loops can occur. 
	    
	    Use IPV6_RECVPKTINFO as socket option rather than
	    IPV6_PKTINFO where available. This keeps late-model FreeBSD
	    happy.

	    Set source interface when replying to IPv6 UDP
	    queries. This is needed to cope with link-local addresses.

version 2.12
            Added extra checks to ensure that DHCP created DNS entries 
	    cannot generate multiple DNS address->name entries. Thanks to 
	    Stefan Monnier for finding the exact set of configuration
            options which could create this.

	    Don't set the the filterwin2k option in the example config
	    file and add warnings that is breaks Kerberos. Thanks to
	    Simon Josefsson and Timothy Folks for pointing that out.
	    
	    Log types of incoming queries as well as source and domain.

	    Log NODATA replies generated as a result of the
	    filterwin2k option.

version 2.13
	    Fixed crash with un-named DHCP hosts introduced in 2.12.
	    Thanks to Nicolo Wojewoda and Gregory Gathy for bug reports.

version 2.14
	    Fix DHCP network detection for hosts which talk via a
	    relay. This makes lease renewal for such hosts work
	    correctly.

	    Support RFC3011 subnet selectors in the DHCP server.

	    Fix DHCP code to generate RFC-compliant responses
            to hosts in the INIT-REBOOT state.

	    In the DHCP server, set the receive buffer size on 
	    the transmit-only packet socket to zero, to avoid 
	    waste of kernel buffers.

	    Fix DHCP address allocation code to use the whole of
	    the DHCP range, including the start and end addresses.
	    
	    Attempt an ICMP "ping" on new addresses before allocating 
	    them to leases, to avoid allocating addresses which are in use.

	    Handle rfc951 BOOTP as well as DHCP for hosts which have
	    MAC address to IP address mapping defined.

	    Fix compilation under MacOS X. Thanks to Chris Tomlinson.

	    Fix compilation under NetBSD. Thanks to Felix Deichmann.

	    Added "keep-in-foreground" option. Thanks to Sean
	    MacLennan for the patch.

version 2.15
            Fixed NXDOMAIN/NODATA confusion for locally known
            names. We now return a NODATA reponse for names which are
            locally known. Now a query for (eg AAAA or MX) for a name
	    with an IPv4 address in /etc/hosts which fails upstream
            will generate a NODATA response. Note that the query 
	    is still tried upstream, but a NXDOMAIN reply gets
            converted to NODATA. Thanks to Eric de Thouars, Eric
            Spakman and Mike Mestnik for bug reports/testing.

	    Allow multiple dhcp-ranges within the same network. The
	    original intention was that there would be a dhcp-range
	    option for each network served, but there's no real reason
	    not to allow discontinuous ranges within a network so this
	    release adds support for that.

	    Check for dhcp-ranges which are inconsistent with their 
	    netmask, and generate errors or warnings.
	    
	    Improve error messages when there are problems with
	    configuration.

version 2.16
	    Fixed typo in OpenBSD-only code which stopped compilation
            under that OS. Chris Weinhaupl gets credit for reporting 
            this.

	    Added dhcp-authoritative option which restores non-RFC 
	    compliant but desirable behaviour of pre-2.14 versions and
            avoids long timeouts while DHCP clients try to renew leases
            which are unknown to dnsmasq. Thanks to John Mastwijk for 
	    help with this.	 

	    Added support to the DHCP option code to allow RFC-3397 
	    domain search DHCP option (119) to be sent.

            Set NONBLOCK on all listening sockets to workaround non-POSIX
            compliance in Linux 2.4 and 2.6. This fixes rare hangs which
            occured when corrupted packets were received. Thanks to
	    Joris van Rantwijk for chasing that down.
 
	    Updated config.h for NetBSD. Thanks to Martin Lambers.

            Do a better job of distinguishing between retransmissions
	    and new queries when forwarding. This fixes a bug
	    triggered by the polipo web cache which sends A and AAAA
	    queries both with the same transaction-ID. Thanks to 
	    Joachim Berdal Haga and Juliusz Chroboczek for help with this.

	    Rewrote cache code to store CNAMES, rather then chasing
	    them before storage. This eliminates bad situations when
	    clients get inconsistent views depending on if data comes
	    from the cache.

	    Allow for more than one --addn-hosts flag.

	    Clarify logged message when a DHCP lease clashes with an
	    /etc/hosts entry. Thanks to Mat Swift for the suggestion.

	    Added dynamic-dnsmasq from Peter Willis to the contrib
	    section.

version 2.17
	    Correctly deduce the size of numeric dhcp-options, rather
	    than making wild guesses. Also cope with negative values.

	    Fixed use of C library reserved symbol "index" which broke
	    under certain combinations of library and compiler.

	    Make bind-interfaces work for IPv6 interfaces too.

	    Warn if an interface is given for listening which doesn't
	    currently exist when not in bind-interfaces mode. (This is
	    already a fatal error when bind-interfaces is set.)

	    Allow the --interface and --except-interface options to
	    take a comma-separated list of interfaces.

	    Tweak --dhcp-userclass matching code to work with the
	    ISC dhclient which violates RFC3004 unless its
	    configuration is very warped. Thanks to Cedric Duval for
	    the bug report. 

	    Allow more than one network-id tag in a dhcp-option. All
	    the tags must match to enable the option.

	    Added dhcp-ignore option to disable classes of hosts based
	    on network-id tags. Also allow BOOTP options to be
	    controlled by network tags.

	    Fill in sname, file and siaddr fields in replies to
	    DHCPINFORM messages.

	    Don't send NAK replies to DHCPREQUEST packets for disabled
	    clients. Credit to Cedric Duval for spotting this.

	    Fix rare crash associated with long DNS names and CNAME
	    records. Thanks to Holger Hoffstatte and especially Steve
	    Grecni for help chasing that one down.

version 2.18
            Reworked the Linux interface discovery code (again) to
	    cope with interfaces which have only IPv6 addresses and 
	    interfaces with more than one IPv6 address. Thanks to
            Martin Pels for help with that.

	    Fix problems which occured when more than one dhcp-range
	    was specified in the same subnet: sometimes parameters
	    (lease time, network-id tag) from the wrong one would be
	    used. Thanks to Rory Campbell-Lange for the bug report.

	    Reset cache statistics when clearing the cache.

	    Enable long command line options on FreeBSD when the
	    C library supports them.

version 2.19 
            Tweaked the Linux-only interface discovery code to cope 
	    with interface-indexes larger than 8 bits in
            /proc/net/if_inet6. This only affects Linux, obviously.  
	    Thanks to Richard Atterer for the bug report.

	    Check for under-length option fields in DHCP packets, a
	    zero length client-id, in particluar, could seriously
	    confuse dnsmasq 'till now. Thanks to Will Murname for help
	    with that.

	    If a DHCP-allocated address has an associated name in
	    /etc/hosts, and the client does not provide a hostname
	    parameter and there is no hostname in a matching dhcp-host
	    option, send the /etc/hosts name as the hostname in 
	    the DHCP lease. Thanks to Will Murname for the suggestion.

version 2.20
	    Allow more than one instance of dnsmasq to run on a
	    machine, each providing DHCP service on a different
	    interface, provided that --bind-interfaces is set. This
	    configuration used to work, but regressed in version 2.14

	    Fix compilation on Mac OS X. Thanks to Kevin Bullock.
	
	    Protect against overlong names and overlong
	    labels in configuration and from DHCP.

	    Fix interesting corner case in CNAME handling. This occurs
	    when a CNAME has a target which "shadowed" by a name in
	    /etc/hosts or from DHCP. Resolving the CNAME would sneak
	    the upstream value of the CNAME's target into the cache,
	    alongside the local value. Now that doesn't happen, though
	    resolving the CNAME still gives the unshadowed value. This
	    is arguably wrong but rather difficult to fix. The main
	    thing is to avoid getting strange results for the target
	    due to the cache pollution when resolving the
	    CNAME. Thanks to Pierre Habouzit for exploring the corner
	    and submitting a very clear bug report.

	    Fix subtle bug in the DNS packet parsing code. It's almost
	    impossible to describe this succinctly, but the one known
	    manifestation is the inability to cache the A record for
	    www.apple.com. Thanks to Bob Alexander for spotting that.

	    Support SRV records. Thanks to Robert Kean for the patches
	    for this.

	    Fixed sign confusion in the vendor-id matching code which
	    could cause crashes sometimes. (Credit to Mark Wiater for
	    help finding this.)

	    Added the ability to match the netid tag in a
	    dhcp-range. Combined with the ability to have multiple
	    ranges in a single subnet, this provides a means to
	    segregate hosts on different address ranges based on
	    vendorclass or userclass. Thanks to Mark Wiater for
	    prompting this enhancement.    

	    Added preference values for MX records.

	    Added the --localise-queries option.

version 2.21
            Improve handling of SERVFAIL and REFUSED errors. Receiving
	    these now initiates search for a new good server, and a 
	    server which returns them is not a candidate as a good
            server. Thanks to Istvan Varadi for pointing out the
            problem.

	    Tweak the time code in BROKEN_RTC mode.

	    Sanity check lease times in dhcp-range and dhcp-host
	    configurations and force them to be at least two minutes
	    (120s) leases shorter than a minute confuse some clients,
	    notably Apple MacOS X. Rory Campbell-Lange found this
	    problem.

	    Only warn once about an upstream server which is refusing to do
	    recursive queries.

	    Fix DHCP address allocation problem when netid tags are in
	    use. Thanks to Will Murnane for the bug report and
	    subsequent testing.

	    Add an additional data section to the reply for MX and SRV
	    queries. Add support for DNS TXT records. Thanks to Robert 
	    Kean and John Hampton for prompts and testing of these.

	    Apply address rewriting to records in the additional data section
	    of DNS packets. This makes things like MX records work
	    with the alias function. Thanks to Chad Skeeters for
	    pointing out the need for this.

	    Added support for quoted strings in config file.

	    Detect and defeat cache-poisoning attacks which attempt to
	    send (malicious) answers to questions we didn't
	    send. These are ignored now even if the attacker manages
	    to guess a random query-id.

	    Provide DHCP support for interfaces with multiple IP
	    addresses or aliases. This in only enabled under Linux.
	    See the FAQ entry for details.

	    Revisit the MAC-address and client-id matching code to
	    provide saner behaviour with PXE boots, where some
	    requests have a client-id and some don't.

	    Fixed off-by-one buffer overflow in lease file reading
	    code. Thanks to Rob Holland for the bug report.

	    Added wildcard matching for MAC addresses in dhcp-host
	    options. A sensible suggestion by Nathaniel McCallum.

version 2.22
            Fixed build problems on (many) systems with older libc
            headers where <linux/types.h> is required before
            <linux/netlink.h>. Enabled HAVE_RTNETLINK under uclibc now
            that this fix is in place.

	    Added support for encapsulated vendor-class-specific DHCP
	    options. Thanks to Eric Shattow for help with this.

	    Fix regression in 2.21 which broke commas in filenames and
	    corrupted argv. Thanks to Eric Scott for the bugreport.

	    Fixed stupid thinko which caused dnsmasq to wedge during
	    startup with certain MX-record options. Another 2.21 regression.

	    Fixed broken-ness when reading /etc/ethers. 2.21 broke
	    this too.

	    Fixed wedge with certain DHCP options. Yet another 2.21
	    regression. Rob Holland and Roy Marples chased this one
	    down.

version 2.23
	    Added a check to ensure that there cannot be more than one
	    dhcp-host option for any one IP address, even if the
	    addresses are assigned indirectly via a hostname and
	    /etc/hosts.

	    Include a "server identifier" in DHCPNAK replies, as
	    required by RFC2131.

	    Added method  support for DBus
	    (http://www.freedesktop.org/Software/dbus)
	    This is a superior way to re-configure dnsmasq on-the-fly
	    with different upstream nameservers, as the host moves
	    between networks. DBus support must be enabled in
	    src/config.h and should be considered experimental at this
	    point. See DBus-interface for the specification of the
	    DBus method calls supported.

	    Added information to the FAQ about setting the DNS domain
	    in windows XP and Mac OS X, thanks to Rick Hull.

	    Added sanity check to resolv.conf polling code to cope
	    with backwards-moving clocks. Thanks to Leonardo Canducci
	    for	help with this.

	    Handle so-called "A-for-A" queries, which are queries for
	    the address associated with a name which is already a
	    dotted-quad address. These should be handled by the
	    resolver code, but sometimes aren't and there's no point
	    in forwarding them.

	    Added "no-dhcp-interface" option to disable DHCP service
            on an interface, whilst still providing DNS.

	    Fix format-string problem - config file names get passed
	    to fprintf as a format string, so % characters could cause
	    crashes. Thanks to Rob Holland for sleuthing that one.

	    Fixed multiple compiler warnings from gcc 4. Thanks to 
	    Tim Cutts for the report.

	    Send the hostname option on DHCP offer messages as well as
	    DHCP ack messages. This is required by the Rio Digital 
	    Audio Receiver. Thanks to Ron Frederick for the patch.
 
            Add 'd' (for day) as a possible time multiplier in lease 
	    time specifications. Thanks to Michael Deegan.

	    Make quoting suppress recognition of IP addresses, so
	    dhcp-option=66,1.2.3.4 now means something different to
            dhcp-option=66,"1.2.3.4", which sets the option to a
	    string value. Thanks to Brian Macauley for the bug report.

	    Fixed the option parsing code to avoid segfaults from some
	    invalid configurations. Thanks to Wookey for spotting that one.
 
            Provide information about which compile-time options were 
	    selected, both in the log at startup and as part of the output 
            from dnsmasq --version. Thanks to Dirk Schenkewitz for 
            the suggestion. 

	    Fix pathalogical behaviour when a broken client keeps sending
            DHCPDISCOVER messages repeatedly and fast. Because dealing with
            each of these takes a few seconds, (because of the ping) then a 
	    queue of DHCP packets could build up. Now, the results of a ping 
            test are assumed to be valid for 30 seconds, so repeated waits are
            not required. Thanks to Luca Landi for finding this.

	    Allow DHCPINFORM requests without hardware address
	    information. These are generated by some browsers, looking
	    for proxy information. Thanks to Stanley Jaddoe for the
	    bug report on that.

	    Add support of the "client FQDN" DHCP option. If present,
	    this is used to allow the client to tell dnsmasq its name,
	    in preference to (mis)using the hostname option. See 
              http://tools.ietf.org/wg/dhc/draft-ietf-dhc-fqdn-option/\
                draft-ietf-dhc-fqdn-option-10.txt
            for details of the draft spec.

	    Added startup scripts for MacOS X Tiger/Panther to the 
            contrib collection. Thanks to Tim Cutts.

	    Tweak DHCP network selection so that clients which turn up
	    on our network in REBINDING state and with a lease for a
	    foreign network will get a NAK response. Thanks to Dan
	    Shechter for work on this and an initial patch and thanks
	    to Gyorgy Farkas for further testing.

	    Fix DNS query forwarding for empty queries and forward
	    queries even when the recursion-desired bit is clear. This
	    allows "dig +trace" to work. Problem report from Uwe
	    Gansert.

	    Added "const" declarations where appropriate, thanks to
	    Andreas Mohr for the patch.

	    Added --bootp-dynamic option and associated
	    functionality. Thanks to Josef Wolf for the suggestion.
 
version 2.24
            Updated contrib/openvpn/dnsmasq.patch from Joseph Tate.

	    Tweaked DHCP NAK code, a DHCP NAK is now unicast as a
	    fallback in cases where a broadcast is futile: namely in
	    response to a unicast REQUEST from a non-local network
	    which was not sent via a relay.

	    Slightly changed the semantics of domain matching in
	    --server and --address configs. --server=/domain.com/ still
	    matches domain.com and sub.domain.com but does not 
	    now match newdomain.com The semantics of 
            --server=/.domain.com/ are unchanged. 
	    Thanks to Chris Blaise for the patch.

	    Added backwards-compatible internationalisation support.
	    The existing make targets, (all, dnsmasq, install) work as
	    before. New ones (all-i18n, and install-i18n) add gettext.
	    The translations live in po/ There are not too many
	    strings, so if anybody can provide translations (and for
	    the manpage....) please send them in.

	    Tweak behaviour on receipt of REFUSED or SERVFAIL rcodes,
	    now the query gets retried on all servers before returning
	    the error to the source of the query. Thanks to Javier
	    Kohen for the report.
 
	    Added Polish translation - thanks to Tomasz Sochanski.

	    Changed default manpage install location from /usr/man 
	    to /usr/share/man 

	    Added Spanish translation - thanks to Christopher Chatham.

	    Log a warning when a DHCP packet is truncated due to lack
	    of space. (Thanks to Michael Welle for the prompt to do
	    this.)
	    
	    Added French translation - thanks to Lionel Tricon.

	    Added Indonesian translation - thanks to Salman AS.

	    Tweaked the netlink code to cope with interface broadcast
	    address not set, or set to 0.0.0.0.

	    Fixed problem assigning fixed addresses to hosts when more
	    than one dhcp-range is available. Thanks to Sorin Panca
	    for help chasing this down.

	    Added more explict error mesages to the hosts file and
	    ethers file reading code. Markus Kaiserswerth suffered to
	    make this happen.

	    Ensure that a hostname supplied by a DHCP client can never
	    override one configured on the server. Previously, any
	    host claiming a name would be given it, even if that
	    over-rode a dhcp-host declaration, leading to potentially 
            confusing situations.

	    Added Slackware package-build stuff into contrib/ The i18n
	    effort broke the current scripts, and working ones were
	    needed for testing, so they ended up here rather than make
	    Pat re-invent the wheel.
	    
	    Added Romanian translation, thanks to Sorin Panca for
	    that.

version 2.25
            Fixed RedHat spec file for FC4 - thanks to Werner Hoelzl
            and Andrew Bird.

            Fixed Suse spec file - thanks to Steven Springl.

	    Fixed DHCP bug when two distict subnets are on the same
	    physical interface. Thanks to Pawel Zawora for finding
	    this and suggesting the fix.

	    Added logging to make it explicit when dnsmasq falls back
	    from using RT-netlink sockets to the old ioctl API for
	    getting information about interfaces. Doing this
	    completely silently made remote debugging hard.

	    Merged uclibc build fixes from the OpenWRT package into
	    src/config.h 

	    Added Norwegian translation - thanks to Jan Erik Askildt.

version 2.26
	    Fixed SuSe rpm patch problem - thanks to Steven Springl.

	    Fixed crash when attempting to send a DHCP NAK to a host
	    which believes it has a lease on an unknown
	    network. Thanks to Lutz Pressler for the bug report and
	    patch.

version 2.27
	    Tweaked DHCP behaviour when a client attempts to renew a lease
            which dnsmasq doesn't know about. Previously that would always
            result in a DHCPNAK. Now, in dhcp-authoritative mode, the
            lease will be created, if it's legal. This makes dnsmasq work
            better if the lease database is lost, for example on an OpenWRT
	    system which reboots. Thanks to Stephen Rose for work on
	    this.

	    Added the ability to support RFC-3442 style destination
	    descriptors in dhcp-options. This makes classless static
	    routes easy to do, eg dhcp-option=121,192.168.1.0/24,1.2.3.4

	    Added error-checking to the code which writes the lease
	    file. If this fails for any reason, an error is logged,
	    and a retry occurs after one minute. This should improve
	    things eg when a filesystem is full. Thanks to Jens Holze
	    for the bug report.

	    Fixed breakage of the "/#/ matches any domain" facility
	    which happened in 2.24. Thanks to Peter Surda for the bug
	    report.

	    Use "size_t" and "ssize_t" types where appropriate in the
	    code.

	    Fix buggy CNAME handling in mixed IPv4 and IPv6
	    queries. Thanks to Andreas Pelme for help finding that.

	    Added some code to attempt to re-transmit DNS queries when 
	    a network interface comes up.  This helps on DoD links, 
	    where frequently the packet which triggers dialling is
            a DNS query, which then gets lost. By re-sending, we can 
	    avoid the lookup failing. This function is only active
	    when netlink support is compiled in, and therefore only
	    under Linux. Thanks to Jean Wolter for help with this.

	    Tweaked the DHCP tag-matching code to work correctly with
	    NOT-tag conditions. Thanks to Lutz Pressler for finding
	    the bug.

	    Generalised netid-tag matching in dhcp-range statements to
	    allow more than one tag.

	    Added --dhcp-mac to do MAC address matching in the same
	    way as vendorclass and userclass matching. A good
	    suggestion from Lutz Pressler.

	    Add workaround for buggy early Microsoft DHCP clients
	    which need zero-termination in string options.
	    Thanks to Fabiano Pires for help with this.

	    Generalised the DHCP code to cope with any hardware
	    address type, at least on Linux. *BSD is still limited to
	    ethernet only.

version 2.28
            Eliminated all raw network access when running on
            Linux. All DHCP network activity now goes through the IP
            stack. Packet sockets are no longer required. Apart from
            being a neat hack, this should also allow DHCP over IPsec
            to work better. On *BSD and OS X, the old method of raw net
            access through BPF is retained.

	    Simplified build options. Networking is now slimmed down
	    to a choice of "linux" or "other". Netlink is always used
	    under Linux. Since netlink has been available since 2.2
	    and non-optional in an IPv4-configured  kernel since 2.4,
	    and the dnsmasq netlink code is now well tested, this 
	    should work out fine. 

	    Removed decayed build support for libc5 and Solaris.
	    
	    Removed pselect code: use a pipe for race-free signal
	    handling instead, as this works everywhere.

	    No longer enable the ISC leasefile reading code in the
	    distributed sources. I doubt there are many people left
	    using this 1.x compatibility code. Those that are will
	    have to explicitly enable it in src/config.h.

	    Don't send the "DHCP maximum message size" option, even if 
	    requested. RFC2131 says this is a "MUST NOT".

	    Support larger-than-minimum DHCP message. Dnsmasq is now
	    happy to get larger than 576-byte DHCP messages, and will
	    return large messages, if permitted by the "maximum
	    message size" option of the message to which it is
	    replying. There's now an arbitrary sanity limit of 16384
	    bytes.

	    Added --no-ping option. This fixes an RFC2131 "SHOULD".

	    Building on the 2.27 MAC-address changes, allow clients to 
	    provide no MAC address at all, relying on the client-id as
	    a unique identifier. This should make things like DHCP for
	    USB come easier.

	    Fixed regression in netlink code under 2.2.x kernels which 
	    occurred in 2.27. Erik Jan Tromp is the vintage kernel fan 
	    who found this. P.S. It looks like this "netlink bind:
	    permission denied" problem occured in kernels at least as
	    late a 2.4.18. Good information from Alain Richoux.

	    Added a warning when it's impossible to give a host its
	    configured address because the address is leased
	    elsewhere.  A sensible suggestion from Mircea Bardac.

	    Added minimal support for RFC 3046 DHCP relay agent-id
	    options. The DHCP server now echoes these back to the
	    relay, as required by the RFC. Also, RFC 3527 link selection 
	    sub-options are honoured.

	    Set the process "dumpable" flag when running in debug
	    mode: this makes getting core dumps from root processes
	    much easier.
	    
	    Fixed one-byte buffer overflow which seems to only cause
	    problems when dnsmasq is linked with uclibc. Thanks to
	    Eric House and Eric Spakman for help in chasing this down.

	    Tolerate configuration screwups which lead to the DHCP
	    server attemping to allocate its own address to a
	    client; eg setting the whole subnet range as a DHCP
	    range. Addresses in use by the server are now excluded
	    from use by clients.

	    Did some thinking about HAVE_BROKEN_RTC mode, and made it
	    much simpler and better. The key is to just keep lease
	    lengths in the lease file. Since these normally never
	    change, even as the lease is renewed, the lease file never
	    needs to change except when machines arrive on the network
	    or leave. This eliminates the code for timed writes, and
	    reduces the amount of wear on a flash filesystem to the
	    absolute minimum. Also re-did the basic time function in
	    this mode to use the portable times(), rather than parsing
	    /proc/uptime.

	    Believe the source port number when replying to unicast 
	    DHCP requests and DHCP requests via a relay, instead of always 
            using the standard ports.  This will allow relays on 
            non-standard ports and DHCPINFORM from unprivileged ports
            to work. The source port sent by unconfigured clients is still 
            ignored, since this may be unreliable. This means that a DHCP 
            client must use the standard port to do full configuration.
 
version 2.29
	    Fixed compilation on OpenBSD (thanks to Tom Hensel for the
	    report). 

	    Fixed false "no interface" errors when --bind-interfaces is
	    set along with --interface=lo or --listen-address. Thanks
	    to Paul Wise for the report.

	    Updated patch for SuSE rpm. Thanks to Steven Springl.

	    It turns out that there are some Linux kernel
	    configurations which make using the capability system
	    impossible. If this situation occurs then continue, running
	    as root, and log a warning. Thanks to Scott Wehrenberg
	    for help tracking this down.

version 2.30
            Fixed crash when a DHCP client requested a broadcast
            reply. This problem was introduced in version 2.28.
	    Thanks to Sandra Dekkers for the bug report.

version 2.31
	    Added --dhcp-script option. There have been calls for this
	    for a long time from many good people. Fabio Muzzi gets
	    the prize for finally convincing me.

	    Added example dbus config file and moved dbus stuff into
	    its own directory.

	    Removed horribly outdated Redhat RPM build files. These
	    are obsolete now that dnsmasq in in Fedora extras. Thanks
	    to Patrick "Jima" Laughton, the Fedora package
	    maintainer.

	    Added workaround for Linux kernel bug. This manifests
	    itself as failure of DHCP on kernels with "support for
	    classical IP over ATM" configured. That includes most
	    Debian kernel packages. Many thanks to A. Costa and
	    Benjamin Kudria for their huge efforts in chasing this
	    down.

	    Force-kill child processes when dnsmasq is sent a sigterm,
	    otherwise an unclosed TCP connection could keep dnsmasq
	    hanging round for a few minutes.

	    Tweaked config.h logic for uclibc build. It will now pick
	    up MMU and IPV6 status correctly on every system I tested.

version 2.32 
	    Attempt a better job of replacing previous configuration
	    when re-reading /etc/hosts and /etc/ethers. SIGHUP is
	    still not identical to a restart under all circumstances,
	    but it is for the common case of name->MAC address in
	    /etc/ethers and name->IP address in /etc/hosts.

	    Fall back to broadcast for DHCP to an unconfigured client
	    when the MAC address size is greater than 14 bytes.

	    Fix problem in 2.28-onwards releases which breaks DNS on
	    Mac OS X. Thanks to Doug Fields for the bug report and
	    testing.

	    Added fix to allow compilation on c89-only compilers.
	    Thanks to John Mastwijk for the patch.
	   
	    Tweak resolv file polling code to work better if there is
	    a race between updating the mtime and file contents. This
	    is not normally a problem, but it can be on systems which
	    replace nameservers whilst active. The code now continues
	    to read resolv.conf until it gets at least one usable
	    server. Thanks to Holger Mauermann for help with this.

	    If a client DECLINEs an address which is allocated to it
	    via dhcp-host or /etc/hosts, lock that address out of use
	    for ten minutes, instead of forever, and log when it's not
	    being used because of the lock-out. This should provide
	    less surprising behaviour when a configured address can't be
	    used. Thanks to Peter Surda and Heinz Deinhart for input
	    on this.

	    Fixed *BSD DHCP breakage with only some
	    arches/compilers, depending on structure padding rules.
	    Thanks to Jeb Campbell and Tom Hensel for help with this.

	    Added --conf-dir option. Suggestion from Aaron Tygart.

	    Applied patch from Brent Cook which allows netids in
	    dhcp-option configuration lines to be prefixed by
	    "net:". This is not required by the syntax, but it is
	    consistent with other configuration items.

	    Added --log-facility option. Suggestion from Fabio Muzzi.

	    Major update to Spanish translation. Many thanks to Chris
	    Chatham. 

	    Fixed gcc-4.1 strict-alias compilation warning.

version 2.33
            Remove bash-specific shellcode from the Makefile.

	    Fix breakage with some DHCP relay implementations which
	    was introduced in 2.28. Believing the source port in
	    DHCP requests and sending the reply there is sometimes a
	    bad thing to do, so I've reverted to always sending to
	    the relay on port 68. Thanks to Daniel Hamlin and Alex
	    (alde) for bug reports on this.

	    Moved the SuSe packaging files to contrib. I will no
	    longer attempt to maintain this in the source tarball. It
	    will be done externally, in the same way as packaging for
	    other distros. Suse packages are available from 
	    ftp://ftp.suse.com/pub/people/ug/
	    
	    Merged patch from Gentoo to honour $LDFLAGS environment.

	    Fix bug in resolv.conf processing when more than one file
	    is being checked.

	    Add --dns-forward-max option.

	    Warn if --resolv-file flags are ignored because of
	    --no-resolv. Thanks to Martin F Krafft for spotting this
	    one.

            Add --leasefile-ro option which allows the use of an 
            external lease database. Many thanks to Steve Horbachuk 
	    for assistance developing this feature.

	    Provide extra information to lease-change script via its
	    environment. If the host has a client-id, then
	    DNSMASQ_CLIENT_ID will be set. Either the lease length (in
	    DNSMASQ_LEASE_LENGTH) or lease expiry time (in
	    DNSMASQ_LEASE_EXPIRES) will be set, depending on the
	    HAVE_BROKEN_RTC compile-time option. This extra
	    information should make it possible to maintain the lease
	    database in external storage such as LDAP or a relational
	    database. Note that while leasefile-ro is set, the script
            will be called with "old"  events more often, since 
	    changes to the client-id and lease length
	    (HAVE_BROKEN_RTC) or lease expiry time (otherwise) 
	    are now flagged. 

	    Add contrib/wrt/* which is an example implementation of an
	    external persistent lease database for *WRT distros with 
	    the nvram command.

	    Add contrib/wrt/dhcp_release.c which is a small utility 
	    which removes DHCP leases using DHCPRELEASE operation in
	    the DHCP protocol.

version 2.34
	    Tweak network-determination code for another corner case:
	    in this case a host forced to move between dhcp-ranges on
	    the same physical interface. Thanks to Matthias Andree.
	    
	    Improve handling of high DNS loads by throttling acceptance of
	    new queries when resources are tight. This should be a
	    better response than the "forwarding table full..."
	    message which was logged before.

	    Fixed intermittent infinite loop when re-reading
	    /etc/ethers after SIGHUP. Thanks to Eldon Ziegler for the
	    bug report.

	    Provide extra information to the lease-change script: when
	    a lease loses its hostname (because a new lease comes
	    along and claims the same new), the "old" action is called 
	    with the current state of the lease, ie no name. The
	    change is to provide the former name which the lease had
	    in the environment variable DNSMASQ_OLD_HOSTNAME. This
	    helps scripts which do stuff based on hostname, rather
	    than IP address. Also provide vendor-class and user-class
	    information to the lease-change script when a new lease is
	    created in the DNSMASQ_VENDOR_CLASS and
	    DNSMASQ_USER_CLASS<n> environment variables. Suggestion 
            from Francois-Xavier Le Bail.

	    Run the lease change script as root, even when dnsmasq is
	    configured to change UID to an unprivileged user. Since
	    most uses of the lease change script need root, this
	    allows its use whilst keeping the security advantages of
	    running the daemon without privs. The script is invoked
	    via a small helper process which keeps root UID, and
	    validates all data received from the main process. To get
	    root, an attacker would have to break dnsmasq and then
	    break the helper through the restricted comms channel 
	    linking the two.
	    
	    Add contrib/port-forward/* which is a script to set up 
	    port-forwards using the DHCP lease-change script. It's
	    possible to add a host to a config file by name, and when
	    that host gets a DHCP lease, the script will use iptables
	    to set up port-forwards to configured ports at the address
	    which the host is allocated. The script also handles
	    setting up the port-forward iptables entries after reboot,
	    using the persistent lease database, and removing them
	    when a host leaves and its DHCP lease expires.

	    Fix unaligned access problem which caused wrong log
	    messages with some clients on some architectures. Thanks
	    to Francois-Xavier Le Bail for the bugreport.

	    Fixed problem with DHCPRELEASE and multi-address
	    interfaces. Enhanced contrib/wrt/dhcp_release to cope
	    under these circumstances too. Thanks to Eldon Ziegler for
	    input on this.

	    Updated French translation: thanks to Gildas Le Nadan.

	    Upgraded the name hash function in the DNS cache. Thanks
	    to Oleg Khovayko for good work on this.

	    Added --clear-on-reload flag.  Suggestion from Johannes
	    Stezenbach.

	    Treat a nameserver address of 0.0.0.0 as "nothing". Erwin 
            Cabrera spotted that specifying a nameserver as 0.0.0.0 
	    breaks things badly; this is because the network stack
	    treats is as "this host" and an endless loop ensues.
		   
            Added Webmin module in contrib/webmin. Thanks to Neil
            Fisher for that.

version 2.35
	    Generate an "old" script event when a client does a DHCPREQUEST
	    in INIT-REBOOT or SELECTING state and the lease already
	    exists. Supply vendor and user class information to these
	    script calls.

	    Added support for Dragonfly BSD to src/config.h

	    Removed "Upgrading to 2.0" document, which is ancient
	    history now.

	    Tweak DHCP networking code for BSD, esp OpenBSD. Added a 
	    workaround for a bug in OpenBSD 4.0: there should finally
            be support for multiple interfaces under OpenBSD now.
	    Note that no version of dnsmasq before 2.35 will work for 
	    DHCP under OpenBSD 4.0 because of a kernel bug.
	    Thanks to Claudio Jeker, Jeb Campbell and Cristobal 
	    Palmer for help with this.

	    Optimised the cache code for the case of large
	    /etc/hosts. This is mainly to remove the O(n-squared)
	    algorithm which made reading large (50000 lines) files 
	    slow, but it also takes into account the size of 
	    /etc/hosts when building hash tables, so overall 
	    performance should be better. Thanks to "koko" for 
	    pointing out the problem.

version 2.36
	    Added --dhcp-ignore-names flag which tells dnsmasq not to
	    use names provided by DHCP clients. Suggestion from 
	    Thomas M Steenholdt.

	    Send netmask and broadcast address DHCP options always,
	    even if the client doesn't request them. This makes a few
	    odd clients work better.

	    Added simple TFTP function, optimised for net-boot. It is
	    now possible to net boot hosts using only dnsmasq. The
	    TFTP server is read-only, binary-mode only, and designed to be
	    secure; it adds about 4K to the dnsmasq binary. 
 
	    Support DHCP option 120, SIP servers, (RFC 3361). Both
            encodings are supported, so both --dhcp-option=120,192.168.2.3
            and	--dhcp-option=120,sip.example.net will work. Brian
            Candler pointed out the need for this.

	    Allow spaces in domain names, to support DNS-SD.

	    Add --ptr-record flag, again for DNS-SD. Thanks to Stephan 
	    Sokolow for the suggestion.
	    
	    Tolerate leading space on lines in the config file. Thanks
	    to Luigi Rizzo for pointing this out.

	    Fixed netlink.c to cope with headers from the Linux 2.6.19
	    kernel. Thanks to Philip Wall for the bug report.

	    Added --dhcp-bridge option, but only to the FreeBSD
	    build. This fixes an oddity with a a particular bridged
	    network configuration on FreeBSD. Thanks to Luigi Rizzo
	    for the patch.

	    Added FAQ entry about running dnsmasq in a Linux
	    vserver. Thanks to Gildas le Nadan for the information.  

	    Fixed problem with option parsing which interpreted "/" as
	    an address and not a string. Thanks to Luigi Rizzo
	    for the patch.

	    Ignore the --domain-needed flag when forwarding NS
	    and SOA queries, since NS queries of TLDs are always legit.
	    Marcus Better pointed out this problem.

	    Take care to forward signed DNS requests bit-perfect, so
	    as not to affect the validity of the signature. This
	    should allow DDNS updates to be forwarded.

version 2.37
            Add better support for RFC-2855 DHCP-over-firewire and RFC
           -4390 DHCP-over-InfiniBand. A good suggestion from Karl Svec.

	    Some efficiency tweaks to the cache code for very large
	    /etc/hosts files. Should improve reverse (address->name)
	    lookups and garbage collection. Thanks to Jan 'RedBully'
	    Seiffert for input on this.

	    Fix regression in 2.36 which made bogus-nxdomain
	    and DNS caching unreliable. Thanks to Dennis DeDonatis
	    and Jan Seiffert for bug reports.

	    Make DHCP encapsulated vendor-class	options sane. Be
	    warned that some conceivable existing configurations 
	    using these may break, but they work in a much 
	    simpler and more logical way now. Prepending
	    "vendor:<client-id>" to an option encapsulates it 
	    in option 43, and the option is sent only if the 
	    client-supplied vendor-class substring-matches with 
	    the given client-id. Thanks to Dennis DeDonatis for 
	    help with this.

	    Apply patch from Jan Seiffert to tidy up tftp.c

	    Add support for overloading the filename and servername 
	    fields in DHCP packet. This gives extra option-space when
	    these fields are not being used or with a modern client
	    which supports moving them into options.

	    Added a LIMITS section to the man-page, with guidance on
	    maximum numbers of clients, file sizes and tuning.

release 2.38
	    Fix compilation on *BSD. Thanks to Tom Hensel.

	    Don't send length zero DHCP option 43 and cope with 
	    encapsulated options whose total length exceeds 255 octets
	    by splitting them into multiple option 43 pieces.

	    Avoid queries being retried forever when --strict-order is
	    set and an upstream server returns a SERVFAIL
	    error. Thanks to Johannes Stezenbach for spotting this.

	    Fix BOOTP support, broken in version 2.37.

	    Add example dhcp-options for Etherboot.

	    Add \e (for ASCII ESCape) to the set of valid escapes
	    in config-file strings.

	    Added --dhcp-option-force flag and examples in the
	    configuration file which use this to control PXELinux.

	    Added --tftp-no-blocksize option.

	    Set netid tag "bootp" when BOOTP (rather than DHCP) is in
	    use. This makes it easy to customise which options are
	    sent to BOOTP clients. (BOOTP allows only 64 octets for
	    options, so it can be necessary to trim things.)

	    Fix rare hang in cache code, a 2.37 regression. This
	    probably needs an infinite DHCP lease and some bad luck to
	    trigger. Thanks to Detlef Reichelt for bug reports and testing.

release 2.39
	    Apply patch from Mike Baker/OpenWRT to ensure that names
	    like "localhost." in /etc/hosts with trailing period 
	    are treated as fully-qualified.

	    Tolerate and ignore spaces around commas in the
	    configuration file in all circumstances. Note that this
	    may change the meaning of a few existing config files, for
	    instance
	    txt-record=mydomain.com, string
	    would have a leading space in the string before, and now
	    will not. To get the old behaviour back, use quotes:
	    txt-record=mydomain.com," string"

	    /a is no longer a valid escape in quoted strings.

	    Added symbolic DHCP option names. Instead of
	    dhcp-option = 3, 1.2.3.4 
	    it is now possible to do
	    dhcp-option = option:router, 1.2.3.4
	    To see the list of known DHCP options, use the 
            command "dnsmasq --help dhcp"
	    Thanks to Luigi Rizzo for a patch and good work on this.

	    Overhauled the log code so that logging can be asynchronous; 
	    dnsmasq then no longer blocks waiting for the syslog() library
	    call. This is important on systems where syslog
	    is being used to log over the network (and therefore doing
	    DNS lookups) and syslog is using dnsmasq as its DNS
	    server. Having dnsmasq block awaiting syslog under 
	    such circumstances can lead to syslog and dnsmasq 
	    deadlocking. The new behaviour is enabled with a new
	     --log-async flag, which can also be used to tune the
	    queue length. Paul Chambers found and diagnosed 
	    this trap for the unwary. He also did much testing of 
	    the solution along with Carlos Carvalho.

	    --log-facility can now take a file-name instead of a 
	    facility name. When this is done, dnsmasq logs to the 
	    file and not via syslog. (Failures early in startup, 
	    whilst reading configuration, will still go to syslog, 
	    and syslog is used as a log-of-last-resort if the file
	    cannot be written.)

	    Added --log-dhcp flag. Suggestion from Carlos Carvalho.

	    Made BINDIR, MANDIR and LOCALEDIR independently
	    over-rideable in the makefile. Suggestion from Thomas
	    Klausner.

	    Added 127.0.0.0/8 and 169.254.0.0/16 to the address
	    ranges affected by --bogus-priv. Thanks to  Paul 
	    Chambers for the patch.

	    Fixed failure of TFTP server with --listen-address. Thanks
	    to William Dinkel for the bug report.

	    Added --dhcp-circuitid and --dhcp-remoteid for RFC3046
	    relay agent data matching.
 
	    Added --dhcp-subscrid for RFC3993 subscriber-id relay
	    agent data matching.

	    Correctly garbage-collect connections when upstream
	    servers go away as a result of DBus transactions.

	    Allow absolute paths for TFTP transfers even when
	    --tftp-root is set, as long as the path matches the root,
	    so /var/ftp/myfile is OK with tftp-root=/var/ftp.
	    Thanks for Thomas Mizzi for the patch.

	    Updated Spanish translation - thanks to Chris Chatham.

	    Updated French translation - thanks to Gildas Le Nadan.

	    Added to example conf file example of routing PTR queries
	    for a subnet to a different nameserver. Suggestion from
	    Jon Nicholson.

	    Added --interface-name option. This provides a facility 
	    to add a domain name with a dynamic IP address taken from
	    the address of a local network interface. Useful for
	    networks with dynamic IPs.

version 2.40
            Make SIGUSR2 close-and-reopen the logfile when logging 
	    direct to a file. Thanks to Carlos Carvalho for 
	    suggesting this. When a logfile is created, change
	    its ownership to the user dnsmasq will run as, don't
	    leave it owned by root.

	    Set a special tag, "known" for hosts which are matched by
	    a dhcp-host or /etc/ethers line. This is especially
	    useful to be able to do --dhcp-ignore=#known, like ISCs
	    "deny unknown-clients".

	    Explicitly set a umask before creating the leases file,
	    rather than relying on whatever we inherited. The
	    permissions	are set to 644.

	    Fix handling of fully-qualified names in --dhcp-host
	    directives and in /etc/ethers. These are now rejected 
	    if the domain doesn't match that given by --domain,	  
	    and used correctly otherwise. Before, putting
	    a FQDN here could cause the whole FQDN to be used as
	    hostname. Thanks to Michael Heimpold for the bug report.

	    Massive but trivial edit to make the "daemon" variable 
	    global, instead of copying the same value around as the
	    first argument to half the functions in the program.
	    
	    Updated Spanish manpage and message catalog. Thanks 
	    to Chris Chatham.
	    
	    Added patch for support of DNS LOC records in
	    contrib/dns-loc. Thanks to Lorenz Schori.

	    Fixed error in manpage: dhcp-ignore-name ->
	    dhcp-ignore-names. Thanks to Daniel Mentz for spotting
	    this.

	    Use client-id as hash-seed for DHCP address allocation
	    with Firewire and Infiniband, as these don't supply an MAC
	    address. 

	    Tweaked TFTP file-open code to make it behave sensibly
	    when the filesystem changes under its feet.

	    Added DNSMASQ_TIME_REMAINING environment variable to the 
	    lease-script.

	    Always send replies to DHCPINFORM requests to the source
	    of the request and not to the address in ciaddr. This
	    allows third-party queries.
	    
	    Return "lease time remaining" in the reply to a DHCPINFORM
	    request if there exists a lease for the host sending the
	    request.

	    Added --dhcp-hostsfile option. This gives a superset of
	    the functionality provided by /etc/ethers. Thanks to 
	    Greg Kurtzer for the suggestion.

	    Accept keyword "server" as a synonym for "nameserver" in 
	    resolv.conf. Thanks to Andrew Bartlett for the report.

	    Add --tftp-unique-root option. Suggestion from Dermot
	    Bradley.

	    Tweak TFTP retry timer to avoid problems with difficult
	    clients. Thanks to Dermot Bradley for assistance with
	    this. 
	    
	    Continue to use unqualified hostnames provided by DHCP
	    clients, even if the domain part is illegal. (The domain
	    is	ignored, and an error logged.) Previously in this
	    situation, the whole name whould have been
	    rejected. Thanks to Jima for the patch.
	    
	    Handle EINTR returns from wait() correctly and reap
	    our children's children if necessary. This fixes 
	    a problem with zombie-creation under *BSD when using
	    --dhcp-script.

	    Escape spaces in hostnames when they are stored in the
	    leases file and passed to the lease-change
	    script. Suggestion from Ben Voigt.

	    Re-run the lease chamge script with an "old" event for
	    each lease when dnsmasq receives a SIGHUP.

	    Added more useful exit codes, including passing on a
	    non-zero exit code from the lease-script "init" call when
	    --leasefile-ro is set.

	    Log memory allocation failure whilst the daemon is
	    running. Allocation failures during startup are fatal, 
	    but lack of memory whilst running is worked around.
	    This used to be silent, but now is logged.

	    Fixed misaligned memory access which caused problems on
	    Blackfin CPUs. Thanks to Alex Landau for the patch.

	    Don't include (useless) script-calling code when NO_FORK
	    is set. Since this tends to be used on very small uclinux 
	    systems, it's worth-while to save some code-size.

	    Don't set REUSEADDR on TFTP listening socket. There's no
	    need to do so, and it creates confusing behaviour when
	    inetd is also listening on the same port. Thanks to Erik
	    Brown for spotting the problem.

version 2.41
            Remove deprecated calls when compiled against libdbus 1.1.
	    
	    Fix "strict-alias" warning in bpf.c

	    Reduce dependency on Gnu-make in build system: dnsmasq now
	    builds with system make under OpenBSD.

	    Port to Solaris. Dnsmasq 1.x used to run under Solaris,
	    and this release does so again, for Solaris 9 or better.

	    Allow the DNS function to be completely disabled, by
	    setting the port to zero "--port=0". The allows dnsmasq to
	    be used as a simple DHCP server, simple TFTP server, or
	    both, but without the DNS server getting in the way.

	    Fix a bug where NXDOMAIN could be returned for a query
	    even if the name's value was known for a different query
	    type. This bug could be prodded with 
            --local=/domain/ --address=/name.domain/1.2.3.4 
	    An IPv6 query for name.domain would return NXDOMAIN, and
	    not the correct NOERROR. Thanks to Lars Nooden for
	    spotting the bug and Jima for diagnosis of the problem.

	    Added per-server stats to the information logged when
	    dnsmasq gets SIGUSR1.

	    Added counts of queries forwarded and queries answered
	    locally (from the cache, /etc/hosts or config).

	    Fixed possible crash bug in DBus IPv6 code. Thanks to Matt
	    Domsch and Jima.

	    Tighten checks for clashes between hosts-file and
	    DHCP-derived names. Multiple addresses associated with a
	    name in hosts-file no longer confuses the check.

	    Add --dhcp-no-override option to fix problems with some
	    combinations of stage zero and stage one
	    bootloaders. Thanks to Steve Alexander for the bug report.
  
	    Add --tftp-port-range option. Thanks to Daniel Mierswa for
	    the suggestion.
 
	    Add --stop-dns-rebind option. Thanks to Collin Mulliner
	    for the patch.

	    Added GPL version 3 as a license option.
 
	    Added --all-servers option. Thanks to Peter Naulls for the
	    patch.

	    Extend source address mechanism so that the interface used
	    to contact an upstream DNS server can be nailed
	    down. Something like "[email protected]" will force
	    the use of eth1 for traffic to DNS-server 1.2.3.4. This
	    facility is only available on Linux and Solaris. Thanks to
	    Peter Naulls for prompting this.	     
	
	    Add --dhcp-optsfile option. Thanks to Carlos Carvalho for
            the suggestion.

	    Fixed failure to set source address for server connections
	    when using TCP. Thanks to Simon Capper for finding this
	    bug.

	    Refuse to give a DHCP client the address it asks for if
	    the address range in question is not available to that
	    particular host. Thanks to Cedric Duval for the bug
	    report. 

	    Changed behavior of DHCP server to always return total length of
	    a new lease in DHCPOFFER, even if an existing lease
	    exists. (It used to return the time remaining on the lease
	    whne one existed.) This fixes problems with the Sony Ericsson
	    K610i phone. Thanks to Hakon Stordahl for finding and
	    fixing this.

	    Add DNSMASQ_INTERFACE to the environment of the
	    lease-change script. Thanks to Nikos Mavrogiannopoulos for
	    the patch.

	    Fixed broken --alias functionality. Thanks to Michael
	    Meelis for the bug report.

	    Added French translation of the man page. Thank to Gildas
	    Le Nadan for that.

	    Add --dhcp-match flag, to check for arbitrary options in
	    DHCP messages from clients. This enables use of dnsmasq
	    with gPXE. Thanks to Rance Hall for the suggestion.

	    Added --dhcp-broadcast, to force broadcast replies to DHCP
	    clients which need them but are too dumb or too old to
	    ask. Thanks to Bodo Bellut for the suggestion.

	    Disable path-MTU discovery on DHCP and TFTP sockets. This
	    is never needed, and the presence of DF flags in the IP
	    header confuses some broken PXE ROMS. Thanks again to Bodo
	    Bellut for spotting this.

	    Fix problems with addresses which have multiple PTR
	    records - all but one of these could get lost. 

	    Fix bug with --address and ANY query type seeing REFUSED
	    return code in replies. Thanks to Mike Wright for spotting
	    the problem.

	    Update Spanish translation. Thanks to Chris Chatham.

	    Add --neg-ttl option.
	    
	    Add warnings about the bad effects of --filterwin2k on
	    SIP, XMPP and Google-talk to the example config file.
	    
	    Fix va_list abuse in log.c. This fixes crashes on powerpc
	    when debug mode is set. Thanks to Cedric Duval for the
	    patch. 

version 2.42
            Define _GNU_SOURCE to avoid problems with later glibc
            headers. Thanks to Jima for spotting the problem.

	    Add --dhcp-alternate-port option. Thanks to Jan Psota for
	    the suggestion.

	    Fix typo in code which is only used on BSD, when Dbus and
	    IPv6 support is enabled. Thanks to Roy Marples.
	    
	    Updated Polish translations - thank to Jan Psota.

	    Fix OS detection logic to cope with GNU/FreeBSD.

	    Fix unitialised variable in DBus code - thanks to Roy
	    Marples.

	    Fix network enumeration code to work on later NetBSD -
	    thanks to Roy Marples.
	    
	    Provide --dhcp-bridge on all BSD variants.

	    Define _LARGEFILE_SOURCE which removes an arbitrary 2GB
            limit on logfiles. Thanks to Paul Chambers for spotting 
            the problem.

	    Fix RFC3046 agent-id echo code, broken for many
	    releases. Thanks to Jeremy Laine for spotting the problem
	    and providing a patch.

	    Added Solaris 10 service manifest from David Connelly in
	    contrib/Solaris10
 	    	     
	    Add --dhcp-scriptuser option.	    

	    Support new capability interface on suitable Linux 
	    kernels, removes "legacy support in use" messages. Thanks 
            to Jorge Bastos for pointing this out. 

	    Fix subtle bug in cache code which could cause dnsmasq to
	    lock spinning CPU in rare circumstances. Thanks to Alex
	    Chekholko for bug reports and help debugging. 

	    Support netascii transfer mode for TFTP.