zrouter

h1. Variables

h2. Board definition

*SOC_VENDOR*

A valid value would be a directory name from ./socs (http://zrouter.org/projects/zrouter/repository/show/socs).

*SOC_CHIP*

A valid value would be a directory name from ./socs/${SOC_VENDOR}.

*BOARD_FLASH_TYPE*

*BOARD_FLASH_SIZE*

h2. Customize kernel

*KERNCONF_IDENT*

Usually ${TARGET_VENDOR}_${TARGET_DEVICE}

*WITH_USB*

If defined (e.g. set to WITH_USB=yes), build with kernel modules like usb, ehci, umass, etc. (see ./socs/${SOC_VENDOR}/${SOC_CHIP}/soc.mk).

*KERNCONF_MODULES_OVERRIDE*

Use this to append additional kernel modules, e.g. KERNCONF_MODULES_OVERRIDE+=usb/uplcom usb/u3g usb/umodem usb/ucom cam zlib

h2. Customize world

*WORLD_SUBDIRS_ZROUTER*

?? Additional utilities, e.g. WORLD_SUBDIRS_ZROUTER+=target/sbin/upgrade

*TARGET_PROFILES*

TARGET_PROFILES+=SMALL_

#TARGET_PROFILES+=SMALL_ mpd ssh shttpd dlink.ua.web hostap dhcp nfs_client # mono # racoon

h2. Firmware image options

*FIRMWARE_IMAGE_SIZE_MAX*

Image must not be bigger than kernel+rootfs partition, but other limitations can apply (GEOM_MAP_P2 upgrade partition).

e.g. FIRMWARE_IMAGE_SIZE_MAX=0x007a0000

*KERNEL_COMPRESSION*

KERNEL_COMPRESSION=oldlzma

KERNEL_COMPRESSION_TYPE=oldlzma

UBOOT_KERNEL_COMPRESSION_TYPE=lzma

MKULZMA_BLOCKSIZE=65536

*PACKING_KERNEL_IMAGE*

PACKING_KERNEL_IMAGE?=kernel.kbin.oldlzma.uboot.sync

*PACKING_ROOTFS_IMAGE*

PACKING_ROOTFS_IMAGE?=rootfs_clean.iso.ulzma

*NEW_IMAGE_TYPE*

For regular u-boot image set to "ubntimage". TODO tplink

NEW_IMAGE_TYPE=ubntimage