DSR-1000N¶

README¶

D-Link DSR-500-1000N README¶

Original file source:boards/D-Link/DSR-1000N/README

# Setup
# !!! Don't forget to change to own addresses
setenv ipaddr 192.168.0.100
setenv serverip 192.168.0.90
setenv loadbsd 'tftp 0 DSR-1000N/D-Link_DSR-1000N.zimage'
setenv flashbsd 'protect off $(linux_start) +$(filesize) ; erase $(linux_start) +$(filesize) ; cp.b $(fileaddr) $(linux_start) $(filesize)'
setenv bootbsd 'gunzip $(linux_start) 0x300000 $(loadaddr) 0x1000000 ; bootoctlinux 0 numcores=1'
setenv updatebsd 'run loadbsd ; run flashbsd'

# Make it to boot automatically
setenv bootcmd 'run bootbsd'

# Save U-Boot environment
saveenv

# Update
run updatebsd

# Boot
run bootbsd

Switch configured by EEPROM as a portbased VLAN

LAN1 - switch port 0
LAN2 - switch port 1
LAN3 - switch port 2
LAN4 - switch port 3
WAN1 - switch port 4 
       switch port 5 - octe1 (name wan1)
       switch port 8 - octe0 (name lan0)
WAN2 - ------------- - octe2 (name wan0)

"Included file" D-Link DSR-500-1000N README

SoC¶

Cavium Octeon CN5010¶

"Included file" Cavium Octeon CN5010

Internals¶

D-Link DSR-500, DSR-500N, DSR-1000, DSR-1000N¶

Family based on Cavium Octeon CN5010 SoC

"Included file" D-Link DSR-500-1000N