D-Link DSR-500-1000N README¶
Original file source:boards/D-Link/DSR-1000N/README
# Setup
# !!! Don't forget to change to own addresses
setenv ipaddr 192.168.0.100
setenv serverip 192.168.0.90
setenv loadbsd 'tftp 0 DSR-1000N/D-Link_DSR-1000N.zimage'
setenv flashbsd 'protect off $(linux_start) +$(filesize) ; erase $(linux_start) +$(filesize) ; cp.b $(fileaddr) $(linux_start) $(filesize)'
setenv bootbsd 'gunzip $(linux_start) 0x300000 $(loadaddr) 0x1000000 ; bootoctlinux 0 numcores=1'
setenv updatebsd 'run loadbsd ; run flashbsd'
# Make it to boot automatically
setenv bootcmd 'run bootbsd'
# Save U-Boot environment
saveenv
# Update
run updatebsd
# Boot
run bootbsd
Switch configured by EEPROM as a portbased VLAN
LAN1 - switch port 0
LAN2 - switch port 1
LAN3 - switch port 2
LAN4 - switch port 3
WAN1 - switch port 4
switch port 5 - octe1 (name wan1)
switch port 8 - octe0 (name lan0)
WAN2 - ------------- - octe2 (name wan0)