Board for wireless routers made by Ubiquiti.
Atheros AR7161 MIPS 24K running @ 680MHz
128MB of DDR RAM
16MB of SPI FLASH
3 MINI-PCI Slots(supports Type IIIA)
1 WAN Gbit port (arge0) (connected through AR8216 switch chip)
3 LAN Gbit ports (arge1) (connected through AR8216 switch chip)
USB 2.0 Port
DC Power Jack (48V)
802.3af 48V compatible
Additional information on [[http://wiki.ubnt.com/RouterStation_Pro]]
Default board IP: 192.168.1.20
Default boot script:
fis load -d -e kernel exec
1.Connect board to the ethernet and serial adapter.
a)enter automatic rescue mode by pressing reset during power up of the board or
b)After connecting power press Ctrl+C to stop running redboot sequence. To enter rescue mode type:
3.On your terminal run tftp in binary mode to put the firmware image into board:
tftp 192.168.1.20 binary put firmware.img
You should observe flash sequence on your serial terminal.